5 Easy Steps to Installing a French Drain on Your Property

A French drain is a plumbing system that uses the natural slope of the ground to help remove excess water.

A french drain is a type of drainage system that uses the natural slope of the ground to help remove excess water. It is an underground pipe with holes in it that are in contact with the soil. A french drain is usually installed when installing new landscaping or where you are having problems with standing water.

Step 1: Select a Location for Drainage System

A French drain is a vertical drainage system that is installed at the lowest point of your property. It consists of two pipes, one on top of the other, with perforated pipe in between. The lower pipe drains water to a depth of about 18 inches and the upper pipe drains to a higher level.

French drains are typically installed in areas where there is a high water table or when the ground is too unstable to install other types of drainage systems.

Step 2: Seek Permission From the Local Authority

The local authority is the best place to start if you want to install a french drain.

You should contact them and ask for their permission before starting any work.

This will ensure that you do not get into any trouble with the law.

french drain
Image Source: Pexels

Step 3: Obtain Permit Approval and Clearance

Obtaining a permit is necessary for any work that will affect the public space.

The first step to obtaining a permit is to contact your local city hall and find out what you need to do. They may have a website with instructions or phone numbers of people who can answer your questions.

You may also need to contact other agencies that are involved in the process, like the water department or county government.

Step 4 – Install the French Drain System Properly

Installing an underground french drain is a fairly simple process.

It’s not a complicated task, as long as you follow the steps in the right order.

First, you need to dig a trench that’s at least six inches deep and wide enough to accommodate the pipe. It will be your job to make sure that this trench is level and straight so that it can hold the weight of the pipe without any issues.

Next, you’ll need to place your pipes in the trench and make sure they are level with each other and about one inch below ground level.

Finally, cover up your pipes with dirt or gravel so that they are completely hidden from sight. This will help prevent any issues with water seeping out of the trenches during heavy rainstorms and will also continue to keep the grass hydrated.

Step 5 – Maintain Your New French Drain Installation!

A French drain system is designed to be installed below the surface and collect water that enters the property. The water is then directed to a discharge point, like an open ditch or storm sewer.

In order to maintain your new French drain installation, it’s important that you keep an eye on it for any cracks or leaks. You should also inspect the discharge point for any obstructions or clogs. It’s important to do this regularly so that problems can be addressed before they get worse and more expensive.

Conclusion –

This article will teach you how to install a French drain properly on your property. It will also help you understand the importance of French drains and how to prevent water damage.

Now You Know How To Install A French Drain Properly On Your Property!


Leave a Reply

Your email address will not be published. Required fields are marked *